JCECE Medical 2016 Exam pattern
Shalu Gupta, 29 May 2016, #NATA

JCECE Medical 2016 Exam Pattern- Examination paper’s questions will be based on the syllabus of Physics, Chemistry and Biology. According to JCECE Medical 2016 Exam pattern there will be 50 objective type questions in each Physics, Chemistry and Biology/Bio-technology.  Duration of the examination will be 3 hours. Syllabus of JCECE Medical 2016 will be same as the common syllabus notified by the CBSE. JCECE Medical 2016 will be conducted at approximately 6 exam centres. Applicants who have applied for JCECE Medical 2016 can check exam pattern of JCECE Medical 2016 from this page. 

 

[Click here to Enroll Complete NEET Preparation Package to Crack NEET Exam or call at 011-40360360 to talk expert counsellors]

 

Highlights of JCECE Medical 2016 Exam pattern-

  1. JCECE Medical 2016 is a pen-paper based examination

  2. Question paper will be in both English and Hindi language

  3. Exam will be conducted in two slots

  4. First slot question paper will be based on Biology. Duration of first slot is 1 hours and there will be 50 questions

  5. Second slot question paper will be based on Physics and Chemistry

  6. Duration of second slot is 2 hours. Question paper will consist of total 100 questions

  7. JCECE Medical 2016 question paper will have objective type questions with single correct answer

  8. Every question carries one mark
  9. Aspirants will get one mark for each correct answer and 0.25 marks will be deducted from total score for every incorrect answer

  10. More than one answer indicated a question will be deemed as incorrect response and will be negatively marked

Instructions to be followed in JCECE Medical 2016 examination hall-

  • Candidates are suggested to report at the examination centre at least 30 minutes before the commencement of the class

  • A seat will be allotted to the candidate according to their roll numbers

  • Candidates can carry admit card and ball point pens of good quality inside the examination hall. Any other material such as text books, calculator, mobile phone or other electronics are not allowed in JCECE Medical 2016 examination hall

  • Applicants are suggested to read all instructions printed on the admit card of JCECE Medical 2016 and OMR sheet carefully

JCECE Medical 2016 is scheduled to be conducted on June 12, 2016. Candidates who qualify and secure a rank in JCECE Medical 2016 merit list will be considered for counseling and further admission process.

 

Stay tuned to medicine.careers360.com for more news and feature articles on JCECE Medical 2016

Applications Open Now

UPES - School of Health Sciences
UPES - School of Health Sciences
Apply
View All Application Forms

More like NATA

Questions related to NATA

Showing 3319 out of 3319 Questions
7 Views

i have a experince 4 years in interior designer and i have a degree in interior designer from punjab technical university jalandhar can i do nata exam is eligibale and what is the process

Sharon Rose Student Expert 9th Nov, 2019
Hello Aman,

The eligibility criteria for NATA is given below

  • A candidate must have passed 10+2 with atleast 50% aggregate and must have studied Mathematics, Physics and Chemistry as compulsory subjects.
  • There is no age limit.
  • Diploma holders are not eligible.

So, if you want to pursur B.Arch course then the admission is based on 10+2 and merit in NATA.So your graduation in interior design and experience is not considered while seeking admission in B.arch through NATA.

And when the notification is released for NATA 2020 you can apply for it by filling the application form and exam will be conducted, you need to qualify in that exam and the admission is based on merit in NATA exam.
You may see the detailed eligibility criteria by using the link below

https://www.google.com/amp/s/engineering.careers360.com/articles/nata-eligibility-criteria/amp

I hope this is helpful to you.
1 View

how is the nata question paper based on

Ronak Gala Student Expert 5th Nov, 2019

Nata exam is based upon different subjects.

I'll guide you with the subjects and to know their syllabus in detail, I'll provide you with the link at the end, so that you can get the complete syllabus ofntheese given subjects.

So the first subject is Mathematics.

The second one is General Aptitude.

The last one is the Drawing Test.

  • There will be 2 parts in the exam- part A of 60 minutes duration while Part B of 120 minutes duration

  • Part A will include choice questions (MCQs) and will be conducted online. Meanwhile, Part B will be Drawing test to be answered on A4 size papers

  • Part A comprises Mathematics (20 Questions) and General Aptitude (40 Questions). Each question will be of 2 marks.

  • Part B will be offline based and include 2 questions each carrying 40 marks

  • There is no negative marking

https://engineering.careers360.com/articles/nata-syllabus

Best wishes. Thank you.


5 Views

when starting exam of NATA in our country

Nilutpol Student Expert 4th Nov, 2019
Hello,
National Aptitude Test in Architecture (NATA) is a national level undergraduate exam which is conducted by Council of Architecture (COA) for admission to 5-year B.Arch programme.
This year NATA exam will be conducted twice a year. Once in April and then in July.
The application form for April session will be out in the month of January. So just keep an eye on the official website.
Also for more details please visit this link

https://engineering.careers360.com/exams/nata
Hope it helps
16 Views

I want to join architecture college .. I need help in NATA exam can any one help me

Aditi Amrendra Student Expert 31st Oct, 2019
Hello,


The most important thing is syllabus so first go through it.
NATA Syllabus 2019 for Mathematics
Definitions of A. P. and G.P.; General term; Summation of first n-terms of series n, n2,n 3 ;
Arithmetic/Geometric series, A.M., G.M. and their relation; Infinite G.P. series and its sum.
Logarithms
Definition; General properties; Change of base.
Matrices
Concepts of m x n (m 3, n 3) real matrices, operations of addition, scalar multiplication and
multiplication of matrices. Transpose of a matrix. Determinant of a square matrix. Properties of determinants
(statement only). Minor, cofactor and adjoint of a matrix. Nonsingular matrix. Inverse of a matrix. Finding area
of a triangle. Solutions of system of linear equations. (Not more than 3 variables).
Trigonometry
Trigonometric functions, addition and subtraction formulae, formulae involving multiple and
submultiple angles, general solution of trigonometric equations. Properties of triangles, inverse trigonometric
functions and their properties.
Coordinate geometry
Distance formula, section formula, area of a triangle, condition of collinearity of three
points in a plane. Polar coordinates, transformation from Cartesian to polar coordinates and vice versa. Parallel
transformation of axes, concept of locus, elementary locus problems. Slope of a line. Equation of lines in
different forms, angle between two lines. Condition of perpendicularity and parallelism of two lines. Distance
of a point from a line. Distance between two parallel lines. Lines through the point of intersection of two lines.
Equation of a circle with a given center and radius. Condition that a general equation of second degree in x, y
may represent a circle. Equation of a circle in terms of endpoints of a diameter . Equation of tangent, normal
and chord. Parametric equation of a circle. Intersection of a line with a circle. Equation of common chord of
two intersecting circles.
3-Dimensional Co-ordinate geometry
Direction cosines and direction ratios, distance between two points
and section formula, equation of a straight line, equation of a plane, distance of a point from a plane.
Theory of Calculus
Functions, composition of two functions and inverse of a function, limit, continuity,
derivative, chain rule, derivative of implicit functions and functions defined parametrically. Integration as a
reverse process of differentiation, indefinite integral of standard functions. Integration by parts. Integration
by substitution and partial fraction. Definite integral as a limit of a sum with equal subdivisions. Fundamental
theorem of integral calculus and its applications. Properties of definite integrals. Formation of ordinary
differential equations, solution of homogeneous differential equations, separation of variables method, linear
first order differential equations.
Application of Calculus
Tangents and normals, conditions of tangency. Determination of monotonicity,
maxima and minima. Differential coefficient as a measure of rate. Motion in a straight line with constant
acceleration. Geometric interpretation of definite integral as area, calculation of area bounded by elementary
curves and Straight lines. Area of the region included between two elementary curves.
Permutation and combination
Permutation of n different things taken r at a time (r n). Permutation of n
things not all different. Permutation with repetitions (circular permutation excluded). Combinations of n
different things taken r at a time (r n). Combination of n things not all different. Basic properties. Problems
involving both permutations and combinations.
Statistics and Probability
Measure of dispersion, mean, variance and standard deviation, frequency
distribution. Addition and multiplication rules of probability, conditional probability and Bayes Theorem,
independence of events, repeated independent trails and Binomial distribution.


NATA 2019 Syllabus for General Aptitude

General
Objects, texture related to architecture and built environment. Interpretation of pictorial compositions,
Visualizing three-dimensional objects from two-dimensional drawing. Visualizing different sides of 3D objects.
Analytical reasoning, mental ability (visual, numerical and verbal), General awareness of national/
international architects and famous architectural creations.
Mathematical reasoning
Statements, logical operations like and, or, if and only if, implies, implied by.
Understanding of tautology, converse, contradiction and contrapositive.
Sets and Relations
Idea of sets, subsets, power set, complement, union, intersection and difference of sets, Venn diagram, De Morgan's Laws, Relation and its properties. Equivalence relation definition and elementary examples.


NATA Syllabus 2019 for Drawing Test

Drawing Test
Syllabus
Understanding of scale and proportion of objects, geometric composition, shape, building forms and elements, aesthetics, colour texture, harmony and contrast. Conceptualization and Visualization through structuring objects in memory. Drawing of patterns - both geometrical and abstract. Form transformations in 2D and 3D like union, subtraction, rotation, surfaces and volumes. Generating plan, elevation and 3D views of objects. Creating 2D and 3D compositions using given shape and forms. Perspective drawing, Sketching of urbanscape and landscape, Common day-to-day life objects like furniture, equipment etc., from memory.


You cant really prepare for NATA.This exam is designed in such a way that it tests a lot of thing of a candidate.It requires a basic sense of aptitude knowledge. The drawing questions tests your creative imagination along with your sense of perspective.

Past year papers can help you a lot.Just go through then and observe types of questions that are being asked and prepare accordingly.

Watch online videos if you are not enrolled in amy coaching.

In order to perform well in this exam you will have to dive in it completely.

I hope this helps.
14 Views

can i use my marks from NATA 2019 July to get admission in Manipal university in 2020. As according to my knowledge NATA result is valid for 1 year and the admission process of Manipal University takes place at the month of May and June so will i be able yo use that makrs. please help...

Nilutpol Student Expert 31st Oct, 2019
Hello,
NATA Score is valid for a period of 24 months (2 years) from the date a candidate appears for NATA exam. If 24 months period is over, aspirants have to register for next nATA examination and will have to secure a valid NATA Score/ Rank.
Since you have appeared for NATA in the year 2019, so you can appear for admission inthe academic year 2020 for various institution for B Arch and B.plan.
Hope it helps
Top
The question have been saved in answer later, you can access it from your profile anytime. Access now

Download the Careers360 App on your Android phone

Regular exam updates, QnA, Predictors, College Applications & E-books now on your Mobile

Careers360 App
150M+ Students
24,000+ Colleges
500+ Exams
1500+ E-books