Inorganic Chemistry Chapters for NEET 2025 Preparation - Chapter-wise Weightage

Carius Method MCQ - Practice Questions with Answers

Edited By admin | Updated on Sep 25, 2023 25:24 PM | #NEET

Quick Facts

Carius Method (Halogen and Sulphur) is considered one of the most asked concept.
4 Questions around this concept.

Concepts Covered - 2

Carius Method (Halogen and Sulphur)

Halogens
A known mass of an organic compound is heated with fuming nitric acid in the presence of silver nitrate contained in a hard glass tube known as Carius tube, in a furnace. Carbon and hydrogen present in the compound are oxidised to carbon dioxide and water. The halogen present forms the corresponding silver halide (AgX). It is filtered, washed, dried and weighed.

Let the mass of organic compound taken = m g
Mass of AgX formed = m₁ g
1 mol of AgX contains 1 mol of X
$\text {Mass of halogen in } \mathrm{m}_{1} \mathrm{g} \text { of } \mathrm{AgX} \: =\: \frac{\text { atomic mass of } \mathrm{X} \times m_{1} \mathrm{g}}{\text { molecular mass of } \mathrm{AgX}}$

$\begin{aligned} \text { Percentage of halogen } = \frac{\text { atomic mass of } \mathrm{X} \times m_{1} \times 100}{\text { molecular mass of } \operatorname{Ag} \mathrm{X} \times m} \end{aligned}$

Sulphur
A known mass of an organic compound is heated in a Carius tube with sodium peroxide or fuming nitric acid. Sulphur present in the compound is oxidised to sulphuric acid. It is precipitated as barium sulphate by adding excess of barium chloride solution in water. The precipitate is filtered, washed, dried and weighed. The percentage of sulphur can be calculated from the mass of barium sulphate.

Let the mass of organic compound taken = m g
and the mass of barium sulphate formed = m₁ g
1 mol of BaSO₄ = 233 g BaSO₄ = 32 g sulphur

$\begin{array}{l}{\mathrm{m}_{1} \mathrm{g} \mathrm{BaSO}_{4} \text { contains } \frac{32 \times m_{1}}{233} \mathrm{g} \text { sulphur }} \\\\ {\text {Percentage of sulphur }=\frac{32 \times m_{1} \times 100}{233 \times m}}\end{array}$

Carius Method (oxygen)

The percentage of oxygen in an organic compound is usually found by difference between the total percentage composition (100) and the sum of the percentages of all other elements. However, oxygen can also be estimated directly as follows:
A definite mass of an organic compound is decomposed by heating in a stream of nitrogen gas. The mixture of gaseous products containing oxygen is passed over red-hot coke when all the oxygen is converted to carbon monoxide. This mixture is passed through warm iodine pentoxide (I₂O₅) when carbon monoxide is oxidised to carbon dioxide producing iodine.

$\begin{array}{l}{\text {Compound} \: \overset{\mathrm{heat}}{\longrightarrow}\mathrm{O}_{2}+\text { other gaseous products }} \\\\ 2 \mathrm{C}+\mathrm{O}_{2} \: \overset{\mathrm{1373\, K}}{\longrightarrow} 2 \mathrm{CO\: \times \: 5\: \quad\quad\quad\quad\quad\quad\quad A} \\\\ {\mathrm{I}_{2} \mathrm{O}_{5}+5 \mathrm{CO} \longrightarrow \mathrm{I}_{2}+5 \mathrm{CO}_{2}\: \times \: 2 \quad\quad\quad\quad \mathrm{B}}\end{array}$

On making the amount of CO produced in equation (A) equal to the amount of CO used in equation (B) by multiplying the equations (A) and (B) by 5 and 2 respectively; we find that each mole of oxygen liberated from the compound will produce two moles of carbon dioxide. Thus 88 g carbon dioxide is obtained if 32 g oxygen is liberated.
Let the mass of organic compound taken be m g
Mass of carbon dioxide produced be m1 g
∴ m1 g carbon dioxide is obtained from
$\frac{32 \times m_{1}}{88} \mathrm{g}\: \mathrm{O}_{2}$
$\therefore \text { Percentage of oxygen }=\frac{32 \times m_{1} \times 100}{88 \times m} \%$